AK software Driver install

Samkoon touch screen ak series, need to install AKWorkshop software, and then follow sa software driver
1) Power on the touch screen, and connect the screen to the computer through the USB download cable when the touch screen starts normally;
2) Right-click “My Computer” and select “Properties”;

3) Click “Device Manager” on the left;

4) You can find port

Under normal circumstances, the driver name at this time is with a yellow exclamation mark, but the author’s computer has installed the driver before, so the above picture is the normal appearance of the driver; if it has a yellow exclamation mark, it means the driver file has not been installed correctly ; If the download program is not available at this time;

5) you can right-click the port ,and choose “Update Driver Software(P)…

6) Choose the second “Browse my computer for driver software”

7) Select “from the list of device drivers select (L)

8) Select “Universal Serial Bus Controller” and click Next;

9) Select “Have Disk”;

10) Select “Browse”;

11) Under the driver file downloaded in advance, select the “AKHMI_winusb.inf” file;

12) Click OK

13) Next

14) During the driver installation process, the following interface will appear. Choose to click “Always install this driver software”;

It is necessary to explain here. This is not because the driver has a virus, but the warning issued by the Windows system that cannot verify the publisher. This driver file is specially developed by the R & D engineers of Display Control. Please rest assured!

15) When show this , the driver installation is successful;

16) At this time, go back to “device manager”. The yellow  mark in front of the port disappears

Now You can download the program to the HMI.