EA-043A

samkoon ea-043a hmi

Samkoon EA-043A HMI Touch Screen

4.3 inch HMI touch Screen Samkoon EA-043A
Software: Embedded type Linux
HMI certification: CE
configuration software: SamDraw3.3

High definition resistance screen

HardwareOutline dimension138× 86× 38
Cut-out Size132 × 80
Net Weight0.2Kg
DisplayModelEA-043A
Display Size4.3″(16:9)
Resolution(Px)480× 272
Touch ScreenFour-wire screen
Color262,114
BacklightLED
Contrast Ratio400:1
Luminance400cd/㎡
Properties/CertificationMemory128M FLASH + 32M DDR2
CPUARM9 200MHz
Electric Strength Test500V DC, 1min
ESDLevel2 ± 4kV
FCCFCC,Class A
CEEN55022 & EN55024
Protection GradeIP65(Front panel)
Housing MaterialABS + PC
Power/PortPower SupplyDC24V(+/-15%)
Power Consumption3W
Series PortCOM :RS232/422/485
USB-AYES
USB-BNO
Ethernet PortNO
EnvironmentOperation Temperature-20 ~ 65℃
Operation Humidity10 ~ 90%RH
Shockproof10 ~ 25Hz(XYZ 2G/30min)
SoftwarePC SoftwareSATOOL
For EA-035A-T EA-043A EA-070B

SA6.0: SA touch screen driver is in the software installation directory: *: \ **** \ SATOOL \ USB
EA touch screen driver software is installed in the directory: *: \ **** \ SATOOL \ EAUSB
SA5.0 & SA4.0: SA / EA driver in the software installation directory: *: \ **** \ SamDraw5.0 (or SamDraw4.0) \ USB
Windows XP, Windows7-32 install the driver in the X86 folder
Windows7-64, Windows8 & 10 install the driver in the IA64 folder

Note: For SA5.0 and SA4.0 software on win8 and win10 systems, it is necessary to disable digital signature before installing the driver

Windows8 & 10 system prohibits digital signature
Driver install

17 thoughts to “EA-043A”

  1. Hello, I would like to know if there is a Satool manual in English that I do not speak Chinese and I would like to use your products in my machinery.
    Thanks in advance
    Roger D.

  2. Dear sir:
    I need software for EA-043A HMI. I purchased from aliexpress.
    please send the software and manual in English.

  3. Hello, if open touch screen design file pop out this message” The control has been damaged, please delete the reconstruction!” and file can’t open. Any remedy way?

  4. I bought two hmi ea-043a and ea-070b, I’m using the updated versions of the Satool 6.1.0.43 programs but I can’t apply the recipes. Could you please send me an application as an example? preferably in English?

Leave a Reply

Your email address will not be published. Required fields are marked *