FAs-32MT-AC offers powerful hardware, rich communication interfaces, flexible performance, and upgraded SamSoar2022 software for efficient PLC programming.
- Powerful Hardware and Software Configuration
● 32-bit microcontroller based on Arm® Cortex®-M4 core, 200MHz frequency, enhanced hardware anti-interference, stable operation against power fluctuations, ensuring continuous and efficient machine operation.
● Compiled low-level software ensures short scanning cycles, with execution speed over 10 times that of PLCs with similar configurations.
- Rich Communication Interfaces
● Ethernet interface, supporting Modbus TCP/IP protocol.
● RS485 communication port, supporting Modbus RTU and custom communication protocols.
● 1 full-speed USB download port.
● PLC can be downloaded and debugged from any communication interface.
- Flexible and Comprehensive Performance
● Ethernet host supports 4 high-speed pulse outputs, 4 high-speed counting inputs, and powerful motion control functions.
● Powerful instruction functions.
● CAN communication-based expansion module with a maximum communication rate of 1Mbps, supporting up to 64 expansion modules.
● Expansion modules can run programs as independent control units.
● Supports 1 front-facing small plugin expansion module, allowing flexible combinations of digital IO, analog modules, and temperature modules.
- Upgraded Upper Software SamSoar2022
● Compilation speed < 0.5 seconds, download speed < 3 seconds, and allows online program editing.
● SamSoar2022 supports instruction tables, function block diagrams, SFC step ladder diagrams programming, highly customizable user interface, rich PLC instructions, and C language function block writing.
● Software uses a compiled architecture to prevent decompilation and program cracking.
● Software is highly compatible with competitors, allowing direct conversion of ladder diagrams from the same category into visible ladder diagrams.
● PLC programs can be downloaded through a visible control screen.
Structure and Environment:
- Dimensions: 125×97×81 (mm)
- Weight: 500 (g)
- Operating Temperature: -25°C to 55°C (non-freezing)
- Operating Humidity: 5% to 95% RH (non-condensing)
- Shock Resistance: 10～25Hz (XYZ direction 2G/30 minutes)
- Power Consumption:
- Power Supply: AC 100V to 240V
- Digital Inputs: 16
- Analog Inputs: Expandable through plugins
- Input Modes: Supports SINK/SOURCE (leakage/source type)
- Input Signal Voltage: DC24V ±20%
- High-Speed Counting: 2 channels single-phase (X0, X2) at 200kHz; 2 channels single-phase (X1, X3) at 20kHz
- AB Phase Counting: 2 channels AB phase (X0X1, X2X3) at 200KHZ
- Maximum Input Range:
- Maximum Resolution:
- Analog-to-Digital Conversion Accuracy:
- Overall Measurement Accuracy:
- Digital Outputs: 16
- Analog Outputs: Expandable through plugins
- Output Types: Transistor/NPN
- Output Modes:
- Output Voltage: 24V
- Pulse Outputs: 4 channels, each with a maximum of 200KHZ
- Output Accuracy:
- Output Range:
- Maximum Inductive Load: 12VA
- Maximum Resistive Load: Single point 0.5A, common point 2A
- Output Load Impedance:
- Maximum Resolution:
- FCC Compatibility: Complies with FCC Class A
- Dielectric Strength Test: 1000V AC, 1 minute
- CE Certification: Complies with EN55032 and EN55035 standards
- Protection Level: IP30
- RS485: 2 RS485 ports for serial communication
- RJ45: No
- Ethernet (RJ45): Yes
- USB Device Port: Supports upload/download and online monitoring
- Supervisory Software: SamSoar2022