FAT-16MT-DC (Main Module)
Powerful Hardware and Software Configuration:
- Arm® Cortex®-M4 32-bit MCU, 200MHz frequency, enhanced hardware anti-interference for stable operation.
- Compiled low-level software ensures short scan cycles, 10 times faster than interpreted PLCs.
Rich Communication Interfaces:
- Ethernet interface, Modbus TCP/IP support.
- RS485 communication port, Modbus RTU, and custom protocols.
- 1 full-speed USB download port.
- Download and monitor PLC from any communication port.
Flexible and Comprehensive Performance:
- Ethernet host supports 4 high-speed pulse outputs, 4 high-speed counting inputs, robust motion control.
- Powerful instruction set.
- CAN communication-based right-side expansion module, up to 1Mbps, expandable to 64 modules.
- Expansion modules can run programs as independent control units.
Upgraded Upper-level Software SamSoar2022:
- Compilation speed < 0.5 seconds, download speed < 3 seconds, allows online program editing.
- SamSoar2022 supports instruction tables, function block diagrams, SFC ladder diagrams, highly customizable UI.
- Rich PLC instructions, support writing functions in C language.
- Compiler-based architecture ensures program security.
- Compatible with other PLC programs, can directly convert ladder diagrams.
PLC Program Download via HMI Screen.
Structure and Environment:
- Dimensions: 64×97×72 mm
- Weight: 239g
- Operating Temperature: -25°C to 55°C (non-freezing)
- Operating Humidity: 5% to 95%RH (non-condensing)
- Shock Resistance: 10-25HZ (XYZ direction 2G/30 minutes)
- Power Consumption
- Power Supply: DC 24V±20%
- Digital Input: 8 channels
- Analog Input: None
- Input Mode: SINK/SOURCE, adaptable through internal and external common-point wiring.
- Input Signal Voltage: DC24V±20%
- High-Speed Counting: 2 channels single-phase (X0, X2) at 200kHz; 2 channels single-phase (X1, X3) at 20kHz
- AB Phase Counting: 2 channels AB phase (X0X1, X2X3) at 200kHz
- Measurement Range
- Maximum Input Range
- Maximum Resolution
- Analog-to-Digital Conversion Accuracy
- Overall Measurement Accuracy
- Digital Output: 8 channels
- Analog Output: None
- Output Type: Transistor/NPN
- Output Mode: Voltage
- Output Voltage: 24V
- Pulse Output: 4 channels, each up to 200kHz
- Output Accuracy
- Output Range
- Maximum Inductive Load: 12VA
- Maximum Resistive Load: Single point 0.5A, common point 2A
- Output Load Impedance
- Maximum Resolution
- FCC Compatibility: Class A
- Dielectric Strength Test: 1000V AC, 1 minute
- CE Certification: EN55032 and EN55035 standards
- Protection Level: IP30
- RS485: 1 port for serial communication
- Ethernet: yes
- USB Port: Supports program upload and online monitoring
- Upper-level Software: SamSoar2022