SA-121F Samkoon HMI touch screen with a resolution of 800×600 pixels can replace the SA-12.1A touch screen as long as the size and mounting holes are the same.

samkoon hmi sa-121f

Samkoon Touch Screen SA-121F

SA-121F Samkoon HMI Touch Screen 12.1inch 800*600 replace SA-12.1A

Check More

High definition resistance screen

HardwareOutline dimension340× 256× 54
Cut-out Size330 × 246
Net Weight2.26Kg
Display Size12.1″(4:3)
Resolution(Px)800× 600
Touch ScreenFour-wire screen
Contrast Ratio450:1
Properties/CertificationMemory128M FLASH + 128M DDR2
CPU32-bit Cortex-A8 600MHz
Electric Strength Test500V DC, 1min
ESDLevel4 ± 8kV
CEEN55022 & EN55024
Protection GradeIP65(Front panel)
Housing MaterialABS + PC
Power/PortPower SupplyDC24V(+/-15%)
Power Consumption8W
Series PortCOM1 & COM2 :RS232/422/485
Ethernet PortNO
EnvironmentOperation Temperature-20 ~ 65℃
Operation Humidity10 ~ 90%RH
Shockproof10 ~ 25Hz(XYZ 2G/30min)
SoftwarePC SoftwareSATOOL
  • Programming software: SATOOL

4 thoughts on “SA-121F”

  1. Hi
    I have a problem that maybe you can help me to fix; I installed your software to open a file with a draw of a touch screen SA-043F, the file was made for a friend in China, I can’t open the file because when I try to do it the STOOL software closes. Same was when same happened when I lowered the file directly from the screen, I can do it but if I want to open the file, again SATOOL closes. I hope you can help me.

  2. Good morning. I need to buy an AK-043AW HMI but I can’t find it among the listed dealers. Can you help me, please?

  3. Good evening. I need a “macro” for EA-070B to make the timer work: I am not able to realize it. Could you help me? Thank you

Comments are closed.